Monday, January 30, 2017

The Steps On Cleaning A Faux Sheepskin Rug

By Robert Turner


Other common term for a sheepskin is lambskin. Lambskin is the hide of a sheep. This material is not like the common leather types which are tanned with some fleece intact like pelts. A lot of manufacturers have been using these materials for their products like hats, baby and invalid rugs, clothing, slippers, automotive seat covers, covering, footstools, pelts, and gloves.

A wool or a fleece can be considered as hypoallergenic according to many medical professions. Sheepskins are considered as insulators themselves and that is why, they have the ability of drawing the perspiration away from wearers to fibers. In the history, a faux sheepskin rug and also sheepskin boots, vests, and coats are very common to people. Here are them following steps to clean these items properly and maintain their quality.

First is to fill in the tub with tepid warm water then the appropriate type of liquid solution or powder for this particular material. And since a wool or fleece material is being used, be sure to the use the delicate wool solution and a small amount to the water. The item surely contains a label of instructions so make sure to follow them carefully to maintain its quality and as well as the appearance.

Using a hot water for washing maybe fine but this must not be used excessively. This can bring some unnecessary disadvantages. These cons would include causing the wool pile to felt, making the process of rinsing become difficult, setting some stains that are hard to remove, damaging the leather and shrinking it, and causing color loss.

A woolskin shampoo and conditioner is recommended for use in washing and not the wool detergents. These detergents contain phosphates, bleach, triethanolamine, phosphoric acid, chelating agents, alkali, peroxide, sequestering agents, or enzymes. All of these might be harmful to the leather, and thus, using these must be avoided.

Position the rug in tube fleece in side down. Be sure to immerse the material fully into a warm water. Similar to the washing processes of other clothing, the rug may be left soaked in water for several minutes with the solution in the mixture. Through this, removing the dirt can be done much easier and allowing the solution scent to be absorbed. Scrubbing it forcibly for removing excess dirt must be avoided.

The next step is washing it gently using your hands. Sometimes, some stains and dirt may still be left, but never think of scrubbing the item for avoiding damage. After removing all the stains, rinse it very well with fresh warm water. Continue on washing until the water is clear with no bubbles left.

After all these processes, drain first the sheepskin before you remove it from water. Combing the fur can be done to prevent ties which look ugly. Combing also can maintain the softness of material even after drying. One important reminder is the avoidance of brushing harshly to prevent it to fall down and comb it one direction only.

When drying it up, laying it down in side down position with fleece can be done, or maybe hanging it for a drip drying. Make sure to hang it away from sunlight. Excess heat damage your wool. Using the dryer maybe done as well as long as the setting is in fluff or gentle cycle only.




About the Author:



No comments:

Post a Comment